GE 2-9720 manual ‘ Pause Function, Other Storing Procedures, Pabx and PBX USE

DIALING

Emergency/Quick Dial Numbem:

1.PICK-UP Handset.

2.Wait for DIAL TONE

3. PRESS ~ or ~] or ~

Frequently called numbers (already in Memory):

1.PICK UP Handset.

2.	Wait for DIAL TONE.
	● g	~:;;
3.	PRESS I MEMORY DIAL] -	Location
	“m	Number.

‘PAUSE FUNCTION

Used for storing a momentary delay in the dialing sequence of a stored telephone number. This is generally used when a “PAUSE” is needed to wait for a dial tone (e.g. after dialing 9 for an outside line) or a computer tone (e.g. for some long distance sewices) before you can proceed to dial.

At point where pauae is required. .,

PRESS [~j

NOTE:

●The REDIAL key will place a pause in the dialing sequence anytime it is pressed after dialing a number. When storing Pause in MEMORY, each pause counts as one stored digit.

●PAUSE is pre-set for a short delay. If a longer PAUSE is re- quired, press REDIAL again.

OTHER STORING PROCEDURES

Changing a Stored Number:

1.PICK-UP Handset.

			DIAL	*	~	pRESS
2.	PRESS	[~]	m ~~;ne ● -]	●	~	~o;~t;~n
			Number	~	@	Number.
3.	HANG	UP

Correcting an Error While Storing:

1.HANG UP

2.Repeat Procedure for Storing Numbers in Memory.

PABX AND PBX USE

Memory and Redial may require the use of a “PAUSE” when initial- ly dialing or storing outside numbers. The sequence, then, for dial- ing or storing an outside number would be, for example:

6