GE 2-9720 manual Chain Dialing, Replacement

Page 7

CHAIN DIALING

Allows you to dial in succession a chain of numbers in different memory locations. This is handy when you must dial more than one number in memory to complete a call, such as with frequent calls via an independent long distance sewice. (e.g. MCI or SPRINT.

For Example:

 

 

 

 

Memory

 

 

 

 

Location

Local Access Number of Long Distance Service

 

m

and two (or three)

Pauses at end.

is in

Authorization

Code

(ID Number).

is in

m

 

Long Distance

Phone Number you wish to call.

is in

m

 

To Initiate Chain Dialing:

Dials # inDials # inDials # in

Memory Location 7 Memory Location 8 Memory Location 9

REPLACEMENT

A consumer replaceable long-life Lithium Battery (3V) is installed in the phone to provide back-up power for retaining numbem in memory.

BATTERY REPLACEMENT (cont.)

To Replace Baffe~:

1. UNPLUG telephone line from phone wall outlet.

2. UNPLUG handset cord.

3. Use pointed object to remove telephone number pldc cover, card and battery cover to ex- pose battery holder.

4. Using a small flat screwdriver, insert in opening at either end of battery holder and pop up.

5. Slide battev holder out and dispose of immediately in the proper manner. (Do Not Touch Battery).

6. Insert replacement battev and holder. (Holder can be inserted only one way.) Snap into place.

7. Replace battery cover, tele- phone number card, and plastic cover.

8. PLUG teleDhone line cord into phone wali outlet.

9. Connect the coiled cord to the handset.

10. R-ram num% into~.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Telephone/FM=AM Introduction Table of ContentsControls and Features Sefup Operation Making and Receiving Calls Memory PULSE/TONE SwitchAutomatic Redialing ‘ Pause Function Other Storing ProceduresPabx and PBX USE Chain Dialing ReplacementProduct Care Battery ReplacementReplaceable Telephone Cord Trouble or Malfunction SolutionInterference Information Important InformationHearing AID Compatibility FCC Registration InformationClock Radio Controls and Features Operating the Radio Setting the TimeSetting the Wake Time Clock Radio OperationSleep to Music Wake to AlarmSleep to Music Wake to Music or Alarm SNOOZ-ALARM@ Control OperationNO-WORRY Battery Backup System Adjusting the Display BrightnessAntennas Case of Difficulty ServiceFCC Information TWO-YEAR Limited Warranty

2-9720 specifications

The GE 2-9720 is a cutting-edge locomotive model developed by General Electric, designed to meet the demanding requirements of modern railroads for efficiency, power, and environmental sustainability. Entering service in the early 2000s, the 2-9720 is part of GE's Evolution Series, which focuses on advanced technology and fuel efficiency.

One of the main features of the GE 2-9720 is its powerful 12-cylinder engine, specifically designed to provide high horsepower while being environmentally friendly. The locomotive is equipped with the GE Tier 3 compliant and Ecomagination technology, which helps reduce emissions compared to older models. The locomotive meets strict EPA standards, making it a suitable choice for rail operators looking to minimize their environmental footprint.

The GE 2-9720 also incorporates the latest in electronic controls, which enhance the overall performance and reliability of the locomotive. The advanced microprocessor control system allows for real-time diagnostics and maintenance planning, ensuring optimal performance under varying conditions. Operators benefit from features such as traction control, which optimizes adhesion on different rail conditions, improving safety and efficiency during operations.

Another notable characteristic of the GE 2-9720 is its dynamic braking system. This technology converts kinetic energy back into electrical energy, which can be fed back into the locomotive's systems or used to power other trains on the line, thus enhancing overall energy efficiency. This feature is especially beneficial for operations involving frequent stops, gradients, or heavy loads.

Additionally, the GE 2-9720 is designed with crew comfort and safety in mind. The operator's cab is ergonomically equipped with advanced user interfaces for monitoring train performance, ensuring that engineers have the necessary tools to operate the locomotive efficiently. Safety systems include enhanced visibility features for improved situational awareness and automatic fault detection systems that alert operators to potential issues before they become critical.

The durable construction of the GE 2-9720 ensures long-lasting performance and reduced maintenance costs. With its rugged design, the locomotive is well-suited for various railway applications, including freight transport and passenger services. The combination of power, efficiency, and advanced technology makes the GE 2-9720 a popular choice among rail operators looking to enhance their fleets and improve operational performance in today's competitive rail industry.
Top Page Image Contents