Multi-Tech Systems iCell GPRS (MTSMC-G2-IP manual Line feed character not just any key

Part 1 – AT Commands for All Universal IP Devices Chapter 5 – TCP AT Commands

#TCPTELNETMODE – Enable/Disable TCP Client Telnet Protocol

Description:	Enables or disables the TCP Client Telnet protocol.
	Note:	Allows the TCP Client Telnet to handle a minimal telnet protocol.
	Note:	This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
	Note:	TCP Client raw mode requires the username and password each to be followed by
		a line feed character not just any key.
Syntax:	AT#TCPTELNETMODE=<parameter1>, <parameter2>
Values:	parameter 1
	1	TCP profile 1
	2	TCP profile 2
	parameter 2
	0	Disable TCP Client Telnet protocol function
	1	Enable TCP Client Telnet protocol function with username and password login
	2	Enable TCP Client Telnet protocol function without username and password login
	3	Enable TCP Client raw mode function with username and password login
Responses:	\r\n#TCPTELNETMODE: VALUE1,VALUE2\r\n
	\r\nOK\r\n
	\r\nERROR\r\n

Examples:

send: AT#TCPTELNETMODE=1,1\r reply: \r\nOK\r\n

send: AT#TCPTELNETMODE=1\r reply: \r\n#TCPTELNETMODE: 1,1\r\n reply: \r\nOK\r\n

#TCPTELNETPW – Configure the TCP Client Telnet Protocol Login Password

Description:	Configures the login password for the TCP Client Telnet protocol.
	Note: This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)
Syntax:	AT#TCPTELNETPW=<parameter1>, <parameter2>
Values:	parameter 1
	1 TCP profile 1
	2 TCP profile 2
	parameter 2
	64 character alphanumeric string
Responses:	\r\n#TCPTELNETPW: VALUE1,VALUE2\r\n
	\r\nOK\r\n
	\r\nERROR\r\n
Examples:	send: AT#TCPTELNETPW=1,"PASSWORD"\r
	reply: \r\nOK\r\n
	send: AT#TCPTELNETPW=1\r
	reply: \r\n#TCPTELNETPW: 1,"PASSWORD"\r\n
	reply: \r\nOK\r\n

Universal IP AT Commands Reference Guide (Document S000457K) 37