Multi-Tech Systems iCell GPRS (MTSMC-G2-IP #GPIOTRIGGER Configure the Gpio pin and trigger type

Part 5 – GPIO AT Commands Chapter 15 – GPIO AT Commands

#GPIOTRIGGER – Configure the GPIO pin and trigger type

Description: Configure the GPIO pin and trigger type.

Syntax: AT#GPIOTRIGGER=<parameter1>,<parameter2>

Values: parameter 1 (GPIO pin) 1 - GPIO Port 1

2 - GPIO Port 2

3 - GPIO Port 3

4 - GPIO Port 4

5 - GPIO Port 5 parameter 2 (trigger type)

0 - Trigger at (or above for analog) (default for backwards compatibility) 1 - Trigger on active to inactive

2 - Trigger on inactive to active

3 - Trigger on both edges

4 - Trigger at (or below for analog) (Default is 0)

Responses: \r\n#GPIOTRIGGER: VALUE1,VALUE2\r\n \r\nOK\r\n

\r\nERROR\r\n

Examples: send: AT#GPIOTRIGGER=1,1\r reply:\r\nOK\r\n

send: AT#GPIOTRIGGER=1\r reply: \r\n#GPIOTRIGGER: 1,1\r\n reply:\r\nOK\r\n

send: AT#GPIOTRIGGER=2,2\r reply: \r\nOK\r\n

send: AT#GPIOTRIGGER=2\r reply: \r\n#GPIOTRIGGER: 2,2\r\n reply:\r\nOK\r\n

Universal IP AT Commands Reference Guide (Document S000457K) 90