Talkswitch TS-100 instruction manual Caller ID Features, Message Light, Message Waiting

Page 17

Caller ID Features

MESSAGE LIGHT

An indicator marked NEW CALL will light up to let you know when there are new calls received.

If you have a TalkSwitch voice mailbox associated to the local extension where this phone is connected, another indicator marked MESSAGE will flash to alert you of new messages. Dial ‘ * * + your extension number’ to access messages. If Direct Line Access is enabled, you will need to press HOLD/FLASH first.

The MESSAGE indicator also monitors the unit’s situation. When the phone is in use, the MESSAGE indicator will be on continuously. If the indicator is flashing quickly, it means the phone is ringing. If it is not ringing and the light is flashing, the unit has experienced a power outage. Take the handset off hook then back on hook again to stop the flashing light.

MESSAGE WAITING

This unit’s MESSAGE WAITING DETECTION is for both FSK and Stutter Tone Systems.

IF YOUR SERVICE IS FSK (Including TalkSwitch):

1.If you have a voice mailbox service from the phone company, the MESSAGE indicator will flash and [MESSAGE WAITING] will appear on the display for 20 seconds when a message waiting signal (on) from the Central Office or TalkSwitch is received.

2.The MESSAGE indicator will go off and [MSG WAITING OFF] will appear for 20 seconds if the message waiting off signal is sent from the Central office or TalkSwitch.

IF YOU ARE IN AN AREA WHERE AN FSK SIGNAL IS NOT AVAILABLE:

1.This unit will check your line for a stutter dial tone every time you hang up or each time a call goes unanswered. The MESSAGE indicator will flash when there is a message waiting.

2.You may experience some delay in seeing the MESSAGE indicator light up even though there are messages in your rnail box. This delay is due to regulatory matters and does not indicate a problem with the unit.

This unit may not be activated or deactivated under certain conditions. For example, when you retrieve your message from an outside phone (not your own telephone number), the MESSAGE indicator may not be canceled when you return home. If you experience this situation, pick up the receiver and hang up. The MESSAGE indicator will cancel.

1 1

TS-100 Owner’s Manual

Image 17
Contents TalkSwitch TS-100 Multi-Feature Telephone Page Table of Contents Telephone Part Identification Telephone Display Identification Important Safety Instructions 24/90V Message Waiting Lamp InstallationTelephone Usage Telephone Usage Wall Mount InstructionsSetup Factory PresetsPulse and Tone Dialing Telephone FeaturesReceiving a Phone Call Placing a Phone CallDuration Counter Volume ButtonMute Button Automatic MemoryPause Button Redial ButtonHold Button HOLD/FLASH ButtonCall Waiting Display Headset CompatibleData Port Hang up your extension immediately Using The Telephone With TalkSwitchOutside / 1 Local Caller Using The Telephone With TalkSwitchLocal Extensions Customizing the Telephone For Talkswitch If Your Service is FSK Including TalkSwitch Caller ID FeaturesMessage Light Message WaitingReviewing Calls Caller ID FeaturesReceiving Calls Calling Back from the Caller ID List Deleting Calls785 Options ButtonNo Data Sent Message ErrorPrivate Calls Unknown CallsTelephone Repair Telephone Service ProblemsMaintenance Information Troubleshooting FCC Information Limited Warranty Carling Ave., Suite 510, Ottawa, ON, K1Z 8P9