Talkswitch TS-100 Duration Counter, Mute Button, Automatic Memory, Volume Button

Page 11

Telephone Features

DURATION COUNTER

A built-in counter will start counting from your reference 6 seconds after you lift the handset or 6 seconds after you dial a telephone number.

MUTE BUTTON

Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up and remain lighted until you resume your conversation. To resume your conversation, press MUTE. The MUTE indicator will go out and your call can continue.

AUTOMATIC MEMORY

To Store A Number In Memory:

1.Press the STORE button, [MEMORY STORING] appears on the display window.

2.Dial the telephone number (15 digits maximum) to store in memory.

Note: The memory locations can be chained together to store numbers of longer length.

3.Press STORE again.

4.Press the desired memory location.

•To store in an auto memory button (located on right-hand side of base) - Press 1, 2, 3, 4, 5.

•To store in a keypad memory location - Press one of the keypad buttons (l, 2, 3, or 0).

5.Use pull out memory index to write in name and the memory button where it is stored.

To Dial A Phone Number In Memory

1.Lift the handset and wait for a dial tone.

2.Press any memory location.

•To dial an auto memory button (located on right-band side of base) - Press the desired auto memory button (1, 2, 3.... or 5).

•To dial a keypad memory location - press the MEM DIAL button first, and then the desired keypad button (1, 2, 3.... or 0).

3.The number will be displayed and dialed automatically.

VOLUME BUTTON

A built-in amplifier feature allows you to increase the listening volume in the receiver of the handset when speaking with your party. When needed, press the VOLUME button to achieve three different levels. The volume will go back to default after you hang up the handset.

5

TS-100 Owner’s Manual

Page 10 Page 12
Image 11
Page 10 Page 12
Contents TalkSwitch TS-100 Multi-Feature Telephone Page Table of Contents Telephone Part Identification Telephone Display Identification Important Safety Instructions 24/90V Message Waiting Lamp InstallationTelephone Usage Telephone Usage Wall Mount InstructionsSetup Factory PresetsPlacing a Phone Call Telephone FeaturesPulse and Tone Dialing Receiving a Phone CallAutomatic Memory Volume ButtonDuration Counter Mute ButtonHOLD/FLASH Button Redial ButtonPause Button Hold ButtonCall Waiting Display Headset CompatibleData Port Hang up your extension immediately Using The Telephone With TalkSwitchOutside / 1 Local Caller Using The Telephone With TalkSwitchLocal Extensions Customizing the Telephone For Talkswitch Message Waiting Caller ID FeaturesIf Your Service is FSK Including TalkSwitch Message LightReviewing Calls Caller ID FeaturesReceiving Calls Calling Back from the Caller ID List Deleting Calls785 Options ButtonUnknown Calls Message ErrorNo Data Sent Private CallsTelephone Repair Telephone Service ProblemsMaintenance Information Troubleshooting FCC Information Limited Warranty Carling Ave., Suite 510, Ottawa, ON, K1Z 8P9
Top Page Image Contents