Talkswitch TS-100 instruction manual Receiving Calls, Reviewing Calls, Caller ID Features

Caller ID Features

RECEIVING CALLS

1.When the telephone is not in use and a new call is received, the display will show the NEW symbol, the phone number, the caller s name, and time and date of the call for 20 seconds. The RPT (repeat) symbol will appear if the call has come in more than once.

REPEAT SYMBOL

CALL#

AM 8:59 8/24 NEW 06

RPT

765-555-1234

JOHN SMITH

NEW SYMBOL

AM 8:59 8/24 CALL#NEW 05

TOTAL CALLS 06

2.After 20 seconds with no activity, the display will default to the Stand-By screen and remain on until another call is received or a button is pressed.

NEW SYMBOL

AM 8:59 8/24 NEW 06

TOTAL CALL 08

TOTAL NEW CALLS

REVIEWING CALLS

1.When the NEW symbol is flashing on the Stand-By screen, you have new incoming calls. Next to the NEW symbol is the total number of new calls. Press the REVIEW UP () or REVIEW DOWN () button to review the incoming stored calls.

2.The NEW symbol attached to each call will be removed after you review the call.

3.If the NEW symbol is still flashing when the display goes back to the Stand-By screen, there are new calls that you have not yet reviewed.

4.The reviewed number can be stored into any of the auto memory buttons or keypad memory locations by pressing the STORE button first, then one of the memory buttons

5.When you have reached the end of the call records, the display will indicate [-END OF LIST- ] , confirming there are no more calls stored.

CALL# 00

- END OF LIST -

Note: If the telephone number received is more than 10 digits, the unit will only store the first 10 digits into memory.

TS-100 Owner’s Manual 1 2