aPress and hold (idle status).
Restoring the base station to the factory settings
Resetting the base station via the menu
Each individual setting is reset, in particular:
uVoIP settings such as VoIP provider and account data and DTMF settings
uSettings for the local network (page 21)
uDefault connection (page 21)
uThe names of the handsets
uSMS settings (e.g. SMS centres)
uAnswer machine settings (announce- ments are deleted)
uSettings for the connection to the PABX.
SMS lists, the answer machine list and the calls list are deleted.
The date and time and the system PIN are retained. The handsets are still registered.
v¢ÐSettings ¢ Base ¢ Base Reset
~Enter the system PIN and press §OK§.
§Yes§ | Press the display key to |
| confirm. |
Resetting the base station using a key on the base station
As with resetting the base station via the menu, all individual settings are reset. The system PIN will also be reset to “0000” and all handsets registered above and beyond the delivery scope are deregis- tered.
Please note:
For information on how to reregister the handset after resetting it, where applicable, please see the full user guide for your DP450 on the Internet.
Handset/base station settings
¤Remove the cable connections from the base station to the router and fixed network.
¤Remove the base station mains unit from the socket.
¤Press and hold the registration/paging key (page 1).
¤Plug the mains unit back into the power socket.
¤Continue to press and hold the registration/paging key (at least 2 sec.).
¤Release the registration/paging key. The base station has now been reset.
Setting default connection
You can make settings according to whether you want to make calls via VoIP or fixed network by default (press talk key
briefly).
¢ ¢
v | ÐSettings | Telephony |
| ¢ Default Line |
|
VoIP / Fixed Line
Select and press §OK§ (½= on).
Checking the base station MAC address
In idle status:
v55920
The base station MAC address is displayed.
aPress and hold (idle status).
21