Instant EtherFast® Series
Changing the Device Name
The PrintServer comes with a default device name printed on the bottom of the unit, it always starts with the prefix SC (for example, SC489392). The SC name is the name of the PrintServer any time users on the network query it. To make the PrintServer more
To change the PrintServer’s device name, click once on the Device Name of the PrintServer you want to affect, then click on Configuration, and then System. The System Configuration window will appear. To include the PrintServer in a group (for administrative use), use the Group Name option, which appears in a
Enter a new device name for the PrintServer in the Device Name field. When you finish, click on Save. The new setting will be stored in the PrintServer unit. To verify the change, click on the Refresh icon in the
Enabling and Disabling Protocols
If you are not using multiple protocols on your network, you may want to dis- able one or more of the PrintServer’s internal protocols; this may help reduce unwanted network traffic.
Important: Always leave at least one protocol enabled on the
Unless you require TCP/IP to be disabled, leave it alone.
To disable one of the
EtherFast®
Attaching Bi-Admin to a Remote Linksys PrintServer
The
Resetting the Wireless-Ready USB PrintServer
If the PrintServer seems locked up for any reason, you can reset it from the Bi- Admin program. To reset a PrintServer, click once on the Device Name of the PrintServer you want to reset, followed by Init Device, then Reset Device. You can also reset it by pressing the Reset button on the back of the unit, or by unplugging its power cord.
Restoring Factory Default
If you have made irreversible changes in configuration that have rendered the PrintServer unusable, or if you simply want to start over from scratch, you can set the
Important: Restoring Factory Default will erase ALL of the work that you have done on this unit since purchasing it.
21 | 22 |
