Dual-Mode Internet Telephony Kit
3.When the handset is placed on the charger, I do not hear a beep.
If you have turned off the handset tone (refer to “Chapter 4: Using the
If you were supposed to hear a beep, then do the following:
A.Remove the handset from the charger, and then place it on the charger again.
B.Clean the charging contacts with a clean and dry cloth.
4.The Battery Empty icon is displayed even though the handset has charged for more than 14 hours. Do the following:
A.Check that the batteries are installed correctly.
B.Make sure the handset is placed properly on the charger.
C.Use new rechargeable batteries.
5.The handset’s display screen is blank. Do the following:
A.Check to see if the batteries are positioned properly in the battery compartment.
B.Make sure that you have properly connected the handset, charger, and base station. (Refer to “Chapter 3: Getting Started.”)
C.Put the handset on the charger to recharge the batteries.
6.The audio quality is poor. Do the following:
A.Move the handset closer to the base station.
B.There may be interference from nearby electrical devices. Move the base station as needed.
C.If the base station and handset are in a room with thick walls, move the base station and handset as needed.
68 | Appendix A: Troubleshooting |
| Common Problems and Solutions |