TC972 english.qxd 4/13/2004 10:58 AM Page 13
Getting Started
Recalling Stored Numbers from Memory
1.Press the TALK button.
2.Press the MEMO button.
3.Press the keypad button for the number you have stored. The stored number will be dialed automatically.
EXAMPLE: To recall number
1 - Press the TALK button.
2 - Press the MEMO button.
3 - Press the keypad 1 button.
Redial Feature
1.If you get a busy tone, press the TALK button to hang up.
2.Later, press the TALK button again.
3.Listen for a dial tone.
4.Press the REDIAL button. This will automatically redial the last telephone number you called.
Mixed Mode (Temporary Tone) Dialing
If you only have Pulse (rotary dialing) service in your area set the TONE/PULSE select switch at the rear of the Base Unit to PULSE position. If you want to access tone dialing mode, press the TONE button on the Handset and dial the desired number, subsequent digits will be dialed into Tone mode. Pulse mode will reset after the Handset is returned
Using the Headset Feature
Your telephone can utilize a headset (included) to be connected to your Handset for you to enjoy
Insert the small plug on the end of the headset into the Headset Jack at the right side of the Handset. Follow the procedures discussed in “Receiving Calls” and Placing Calls” to receive and place a call.
NOTE: When you plug the headset plug into the Headset Jack it automatically mutes the Microphone and Speaker of the Handset. Unplug the headset to return the Handset to normal use.
The Headset Jack is compatible with 2.5 mm headset plugs only.
12