▲
▼
On the handset:-
Press the UP or DOWN button until the display shows BASE.
To register a new handset to a base (if you have changed System code from 0000)
COK
Press the OK button.
The display will show REGIST.
▲
▼
On the handset:-
Press the UP or DOWN button until the display shows BASE.
Note
If the handset has not been registered to any other base you do not need to press the UP or DOWN button to display BASE. Once charged and switched on the display will show REGIST already. Simply carry out the following instructions to register.
C OK | Press the OK button. |
COK
COK
▼
Press the OK button.
The display will show REGIST.
Press the OK button.
The display will show AUTO.
Press the DOWN button until CUSTOM is displayed.
The available bases will be displayed.
The display will show AUTO.
C OK | Press OK to confirm. |
▲Use the UP or DOWN button to select ▼ the base you want to register your
handset to.
C OK | Press the OK button. |
| The display will show CODE?. |
| |
The display will show ____ ____ . |
CODE Enter your 4 digit base system code (once only).
C OK
Note
To check whether registration has been successful, press the GREEN PHONE button and listen for the dial tone. If there is no dial tone either you have not registered the handset correctly or the telephone line cord is not plugged in properly.
▲
▼
Press the OK button.
At the base:-
Press and hold the button on the base until it begins to flash.
On the handset:-
The display will show 2, 3, 4, 5, 6.
Use the UP or DOWN button to select the handset you wish to register.
19