BT 2100 Classic manual Using the telephone, Call timer, Making and ending calls

Page 9

On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051

Using the telephone

To switch the handset power on and off

Press and hold the GREEN PHONE button until the display check sequence has happened and only the battery icon is displayed.

If you release the button before this has happened the handset will remain switched off.

Press and hold the RED PHONE button to switch the handset off.

Call timer

Your handset will automatically time the duration of all external calls. The handset display shows the call duration both during your call and for a few seconds after it is completed.

To end a call

Press the RED PHONE button.

To receive an external call

Making and ending calls

To make an external call

Press the GREEN PHONE button.

The display shows the symbol.

Dial the number.

Preparatory dialling

First enter the number to be dialled. The number is shown in the display. (If you make a mistake press C to remove the incorrect digit).

If you have entered the number correctly, press the GREEN PHONE button to dial the number.

Press the GREEN PHONE button to answer the call.

To adjust the earpiece volume

You can adjust the volume during a call.

Press the UP button to increase the volume.

Press the DOWN button to decrease the volume.

The display shows the current volume level.

8

Image 9
Contents BT On-Air 2100 Classic At a glance HandsetBase Quick Guide to Menu Structure This guide Using the telephoneIntroduction Safety informationUnpacking your BT On-Air 2100 Classic For your recordsConnect the power supply and switch on Setting upPlan the location Rubber feetCharge the battery in the handset for at least 16 hours Battery low warningChanging your handset fascias Connect the telephone line cord after charging your handsetUsing the telephone Call timerMaking and ending calls Handsfree SecrecyRedial Caller Display Calls listTo view and dial a number in the Calls list Name and number directory Call WaitingTo delete all numbers shown in the redial and calls list To view the length of the last callEntering names To edit directory numbersTransferring calls Paging handsets Internal callsRinger volume Handset settingsQuick guide to handset settings menu Ringer melody Silent ringTo switch automatic end call on or off Base settingsTo change the display language To change your System CodeTo change the base station ringer melody To change the base station ringer volumeTo change base station priority Base station priorityTo view the date and time To set the dateTo set the time Using additional handsets and bases Using additional handsets and basesRegistering additional handsets On the handset To de-register a handset from the base Guarantee General informationTechnical information Switchboard compatibility RecallTo activate Recall Switchboard external line access code To switch between tone and pulse diallingTo set the external line access code To set the number of digits To activate and de-activate the external line access codeWall mounting 122 mm Wall mounting templatePage Index REN Offices worldwide