BT 2100 Classic manual To de-register a handset from the base

Page 21

On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051

C OK Press the OK button.

The display will show REGIST and then return to:

-2-

To de-register a handset from the base

Note

When planning to use a handset with more than one base, we recommend that you:

•Number each handset (from 1- 6).

•Register your handset(s) at base 2

(and 3 & 4 if used) using the same internal number as at base 1.

When registered to more than one base, the base unit will automatically allocate itself a number.

▲Press the UP or DOWN button until

▼the display shows BASE.

C OK	Press the OK button.

▼Press the DOWN button until the display shows PARAM.

Helpline

If you are experiencing difficulty, please call the BT On-Air Helpline on 0870 240 4682.

COK

DEF

3

CODE

C OK

Press the OK button.

Press the 3 button twice.

Enter your base system code (0000 if not changed).

All registered handset numbers are displayed.

Enter the number of the handset you wish to de-register.

Press the C button to exit.

20

Image 21

Contents BT On-Air 2100 Classic At a glance HandsetBase Quick Guide to Menu Structure This guide Using the telephoneIntroduction Safety informationUnpacking your BT On-Air 2100 Classic For your recordsConnect the power supply and switch on Setting upPlan the location Rubber feetCharge the battery in the handset for at least 16 hours Battery low warningChanging your handset fascias Connect the telephone line cord after charging your handsetUsing the telephone Call timerMaking and ending calls Handsfree SecrecyRedial Caller Display Calls listTo view and dial a number in the Calls list Name and number directory Call WaitingTo delete all numbers shown in the redial and calls list To view the length of the last callEntering names To edit directory numbersTransferring calls Paging handsets Internal callsRinger volume Handset settingsQuick guide to handset settings menu Ringer melody Silent ringTo switch automatic end call on or off Base settingsTo change the display language To change your System CodeTo change the base station ringer melody To change the base station ringer volumeTo change base station priority Base station priorityTo view the date and time To set the dateTo set the time Using additional handsets and bases Using additional handsets and basesRegistering additional handsets On the handset To de-register a handset from the base Guarantee General informationTechnical information Switchboard compatibility RecallTo activate Recall Switchboard external line access code To switch between tone and pulse diallingTo set the external line access code To set the number of digits To activate and de-activate the external line access codeWall mounting 122 mm Wall mounting templatePage Index REN Offices worldwide