BT 2100 Classic manual Wall mounting

Page 26

On-Air 2100 Classic ~ 1st Edition ~ Issue 2 ~ 11th November ’02 ~ 5051

Wall mounting

2

1

1Push the base-mount forward onto the rear of the base.

2Once slotted into the rear of the base, slide upwards to lock into position.

If wall mounting your BT On-Air 2100 Classic, use this guide for position.

•Make sure that you are not drilling into any hidden wiring and check that the power cable will reach from the mains socket to the charger. Switch the power adaptor off at the mains and remove the adaptor plug from its socket.

•Drill two holes 25mm deep using a 3mm drill, 122mm apart to take the wall plugs.

•Put wall plugs into the drill holes and then insert both screws. Leave 2-3mm between the head of the screw and the wall. You are now able to mount the base to the wall.

•Fit the base onto the two screws. If necessary, tighten or loosen the screws for the best fit.

•Put the handset back in the base and switch the power back on at the wall socket.

25

Image 26

Contents BT On-Air 2100 Classic Base At a glanceHandset Quick Guide to Menu Structure Using the telephone This guideUnpacking your BT On-Air 2100 Classic Safety informationIntroduction For your recordsPlan the location Setting upConnect the power supply and switch on Rubber feetBattery low warning Charge the battery in the handset for at least 16 hoursConnect the telephone line cord after charging your handset Changing your handset fasciasMaking and ending calls Using the telephoneCall timer Redial HandsfreeSecrecy To view and dial a number in the Calls list Caller DisplayCalls list To delete all numbers shown in the redial and calls list Call WaitingName and number directory To view the length of the last callTo edit directory numbers Entering namesInternal calls Transferring calls Paging handsetsQuick guide to handset settings menu Handset settingsRinger volume Ringer melody Silent ringTo change the display language Base settingsTo switch automatic end call on or off To change your System CodeTo change base station priority To change the base station ringer volumeTo change the base station ringer melody Base station priorityTo set the time To view the date and timeTo set the date Registering additional handsets Using additional handsets and basesUsing additional handsets and bases On the handset To de-register a handset from the base Technical information GuaranteeGeneral information To activate Recall Switchboard compatibilityRecall To set the external line access code Switchboard external line access codeTo switch between tone and pulse dialling To activate and de-activate the external line access code To set the number of digitsWall mounting Wall mounting template 122 mmPage Index REN Offices worldwide