Installation
Follow these steps to set up your Diverse Deskphone ready for use.
Plan the location of your Diverse Deskphone
Make sure your Diverse Deskphone is within 2 metres of the phone and mains sockets.
1Connect the handset to the Deskphone
Put the connector (at the straight long end of the handset cord) into the socket marked on the underside of the telephone. Secure the cord in its groove. Insert the other end of the cord into the handset.
2Connect the Deskphone to the mains power supply
Insert the telephone power supply lead into the socket marked on the underside of the telephone. Put the other end of the
For your own safety use only the BT approved
To make and receive calls your telephone needs to be positioned within range of its base station. The maximum range inside most buildings is 50 metres. Outside, the range is extended to approximately 300 metres (the range will vary depending on where your Diverse base station and Diverse Deskphone are sited, and the conditions within your building). You can set your telephone to beep if it is not within range.
See page 23.