BT 3010 Executive manual Using the Room Monitor, To set the room monitor

Diverse 3010 Executive 22/3/01 12:03 pm Page 36

Diverse 3010 Executive – Edition 4 – 22 November ’00 - 3509

Open listening at the		De-activating open listening:
handset		Press the LSTN.OFF button.
	LSTN.OFF
		The external connection is not
To enable another handset to		affected.
‘listen in’ on your conversation

ADDITONAL FEATURES

If you want another person to hear your call, you can let them listen in on another handset registered to the same base station.

During a call with an external user:

INT Press the INT button. The call is placed on hold.

KEYPAD Enter the call number of the other handset e.g. 2 – the otherhandset rings, the other internal user press the GREEN PHONE button.

LSTN.ON Press the LSTN.ON button. You are reconnected to the external user. The other internal user can hear the conversation.

Note

When in Open Listening the extra handsets can only hear the external caller.

Note

The internal user can elect to terminate open listening by pressing the RED PHONE button.

Using the Room Monitor

If you have at least two handsets registered to your base station, you can leave one handset in a room in order to monitor the noise level.

The handset you leave in the room is noise activated and you can adjust its level of sensitivity to the noise. If the noise reaches the level you have set, the monitoring handset will call your handset so you can hear what’s going on. When you hang up your handset, the handset in the room will continue monitoring the noise.

To set the room monitor

Press the MENU button.

Press the DOWN arrow to highlight Room Monitor Set.

OK Press the OK button.

Press the DOWN arrow to highlight Room Monitor No.

OK Press the OK button.

1-6	Enter the 1-6number of the
	handset to be called.

OK Press the OK button. You can now place the handset in the room you want to monitor.

36