BT 2300 manual Recall

Page 65

General information

65

 

 

Access code and entering a pause

If you are connecting your BT Studio 2300 to a switchboard/PBX you may need to prefix stored numbers with an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code.

PABX access code

1.Press Menu then scroll to Handeset and press OK.

2.Scroll to PABX access code and press OK.

3.Display shows Set Code. Press OK.

4.Enter your PABX access code and press Save.

5.Scroll to ON and press OK.

6.Press and hold Back to return to standby.

Entering a pause

A pause is entered when storing a number in the phonebook (see page 22) or PABX access code by pressing and holding the Vol button until the display shows P.

Recall

The R (Recall) button is used when connected to certain switchboards (PBXs) and with some BT Calling Features, or equivalent services available via your Network Provider.

If you experience any problems, please call the Helpline on 0870 605 8047

Image 65
Contents User Guide Section Welcome…BT Studio 2300 base BT Studio 2300 handset This guide This guide This guide Location Setting upGetting started Talk/Standby time Getting startedYour BT Studio 2300 is now ready for use Range indicatorYour BT Studio 2300 multiple pack is now ready for use Handset buttons Getting to know your phoneBase buttons and LEDs Getting to know your phoneGetting to know your phone Handset display iconsGetting to know your phone Menu map These are the options under each menu heading End a call Press Press or place the handset back on the base Using the phoneHandsfree Secrecy Using the phoneRedial Keypad lock PagingInternal calls Press OFF to return to your callerUsing the phone Handset user, then resume your external call Caller on holdHandset number you want Press Int to end the internal call and return to yourTimes for names beginning with S Press to dial PhonebookEdit name and number PhonebookPhonebook SMS text messaging SMS text messaging Using SMSCost of the fixed line service Character map Writing tipsYou can send a message to an individual entry Using optionsOutbox Insert Symbol scroll to Insert Symbol then pressDelivery of SMS messages Receiving and reading text messagesDeleting Press Back to return to the Inbox screen and to standby Delete scroll to Delete then press OK to delete the messageSMS Service Centre numbers SMS settingsOpen Inbox from standby screen These numbers have been pre-loaded into the BT StudioSMS text messaging User areas PIN protected Set personal user areaDefault settings for SMS text messaging Caller Display BT Calling FeaturesCalls lists Helping you manage your callsPhonebook BT Calling FeaturesRedial Press OK Press Yes to delete or No to cancelFor BT, call 0800 800 Call DiversionReminder Call is a pay as you use service # 5 Handset settings Handset name Handset settingsHandset ringer Volume Handset name Studio Base settings Handset priority When entering a PIN the digits are shown as asterisksEnter the current PIN Original setting 0000 and press OK Base settingsTo confirm Time settingsFor 2.30pm then press OK to Time settingsConfirm Additional handsets and bases Additional handsets and bases Additional handsets and bases Help Appear to be working Switched on Problems Possible cause You cannot link upBase Or replace them if necessaryHelp Receive an incoming call PrefixHelp This means all incoming text is delivered as voice text Turns off the opt out optionTurns off permanent voice text message delivery 0870 605General information SafetyGeneral information General information GuaranteeGeneral information Technical information Connecting to a switchboardRecall TTE Declaration of ConformanceOffices worldwide