BT manual Range indicator, Your BT Studio 2300 is now ready for use

Page 9

Getting started	9

Range indicator

The symbol on your handset display indicates when you are in range of the base. If the symbol flashes and you hear a warning beep, you are out of range and will need to move closer to the base. The display shows Base and the number of the base last used.

Set date and time.

If you have subscribed to your network’s Caller Display service, the time and date will be set automatically when you receive your first call. You can also set the time manually.

1.On the handset, press Menu. Scroll to Time Settings and press OK. Scroll to Set Date & Time and press OK.

2.	Enter the date, e.g.	1	MN					G		for 16th April. Press
			6	O		0		4	HI

	OK.
3.	Enter the time, e.g.			WX		DE				for 9:30am.
		0		9	Y	3	F		0
					Z

Press OK.

The time and date is saved.

4.Press and hold Back to return to standby.

Your BT Studio 2300 is now ready for use.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries can be obtained from the BT Studio Helpline 0870 605 8047.

Helpline

If you have any difficulties setting up your BT Studio 2300, please call the BT Studio Helpline on 0870 605 8047.

If you experience any problems, please call the Helpline on 0870 605 8047

Image 9

Contents User Guide Section Welcome…BT Studio 2300 base BT Studio 2300 handset This guide This guide This guide Setting up Getting startedLocation Talk/Standby time Getting startedYour BT Studio 2300 is now ready for use Range indicatorYour BT Studio 2300 multiple pack is now ready for use Handset buttons Getting to know your phoneBase buttons and LEDs Getting to know your phoneGetting to know your phone Handset display iconsGetting to know your phone Menu map These are the options under each menu heading End a call Press Press or place the handset back on the base Using the phoneHandsfree Using the phone RedialSecrecy Keypad lock PagingInternal calls Press OFF to return to your callerUsing the phone Handset user, then resume your external call Caller on holdHandset number you want Press Int to end the internal call and return to yourTimes for names beginning with S Press to dial PhonebookEdit name and number PhonebookPhonebook SMS text messaging Using SMS Cost of the fixed line serviceSMS text messaging Character map Writing tipsYou can send a message to an individual entry Using optionsOutbox Insert Symbol scroll to Insert Symbol then pressReceiving and reading text messages DeletingDelivery of SMS messages Press Back to return to the Inbox screen and to standby Delete scroll to Delete then press OK to delete the messageSMS Service Centre numbers SMS settingsOpen Inbox from standby screen These numbers have been pre-loaded into the BT StudioSMS text messaging User areas PIN protected Set personal user areaDefault settings for SMS text messaging Caller Display BT Calling FeaturesCalls lists Helping you manage your callsPhonebook BT Calling FeaturesRedial Press OK Press Yes to delete or No to cancelFor BT, call 0800 800 Call DiversionReminder Call is a pay as you use service # 5 Handset settings Handset name Handset settingsHandset ringer Volume Handset name Studio Base settings Handset priority When entering a PIN the digits are shown as asterisksEnter the current PIN Original setting 0000 and press OK Base settingsTo confirm Time settingsTime settings ConfirmFor 2.30pm then press OK to Additional handsets and bases Additional handsets and bases Additional handsets and bases Help Appear to be working Switched on Problems Possible cause You cannot link upBase Or replace them if necessaryHelp Receive an incoming call PrefixHelp This means all incoming text is delivered as voice text Turns off the opt out optionTurns off permanent voice text message delivery 0870 605General information SafetyGeneral information General information GuaranteeGeneral information Technical information Connecting to a switchboardRecall TTE Declaration of ConformanceOfﬁces worldwide