| Getting started |
| 7 |
|
|
|
|
|
|
|
|
Location
You need to place your BT Studio 2300 within 2 metres of a mains power and telephone socket so that the cables will reach.
Make sure it is at least 1 metre away from other electrical appliances to avoid interference.
Your BT Studio 2300 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.
Setting up
1.Plug the power adaptor and telephone cable into the back of the base.
2.Plug the power adaptor into the mains wall socket and switch the power on. When connected correctly, the green Power light on the base comes on.
WARNING
Do not place your BT Studio 2300 in the bathroom or other humid areas.
Handset range
The BT Studio 2300 has a range of 300 metres outdoors when there is a clear line of sight between the base and handset. When there is no clear line of sight between the base and handset, e.g. base indoors and handset either indoors or outdoors, the range could be reduced to 50 metres. Thick stone walls severely affect the range.
Signal strength
The 
symbol on your handset screen indicates when you are in range. When you are out of range, it flashes.
IMPORTANT
Do not connect the telephone line until at least one of the handsets is fully charged.
The base must be plugged into the mains power at all times.
Which socket?
Power socket
Telephone line socket
If you experience any problems, please call the Helpline on 0870 605 8047