BT 1500 Internal calls, Registration of an additional handset when base, Call another handset

47

Registration of an additional handset when base

PIN changed (i.e. if PIN changed from default setting of 0000) At the handset:

1. Press Menu, scroll to Settings and press OK.

2. Scroll to HS Settings and press OK.

3. Scroll or to Register and press OK.

4. Press or to select the base you want (1-4). You should only select a base that has a * displayed beside it. Press OK.

5. Enter the 4-digit system PIN then press OK. The display shows Overwrite the registration on Base x? Press Yes.

6. Press and Hold Base Find Key is displayed, press OK on the handset to commence registration.

At the base:

1. Press and hold for approximately 8 seconds until it beeps and then release. Press OK on the handset to confirm. The base will go into registration mode for 90 seconds and will then beep if registration is successful. The handset will automatically be assigned the next available handset number.

Internal calls

Call another handset

If you have more than one handset registered to the base, you can make internal calls between two handsets.

1. Press and if you have one other handset it will ring. If

you have other handsets, press or to select the handset (1-5) you want to call, then press OK.

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com