![](/images/new-backgrounds/1326295/32629561x1.webp)
8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 31
BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474
Base settings | 31 |
|
|
Change base PIN code
Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings.
The default PIN is 0000.
1.Press , scroll
to SETUP and press
.
2.Scroll to PIN CODE and press
.
3.Enter the current 4 digit PIN code (default: 0000) and press .
4.Enter your new .
5. to confirm.
Dial mode
Your BT Studio 3100 is set to Tone dialling. In the UK, you should only need to change this if connected to an older type of switchboard/PBX which requires Pulse dialling.
1.Press , scroll
to SETUP and press
.
2.Scroll to DIAL MODE and press
.
3.Press or
to select TONE DIAL or PULSE DIAL and press
.
IMPORTANT
If you change the base PIN, make sure you keep a record of the new number on page 41.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com