Selecting a base, Naming additional handsets

8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 34

BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474

34	Additional handsets and bases

	Naming additional handsets	If the base is not found after a few seconds, the handset
	Once you have registered additional	returns to standby. Try registering again.
	handsets you may wish to give them a
	different name, see page 26.	When a handset is registered to a base, it is automatically
		When a handset is registered to a base, it is automatically
		assigned a number which is displayed on the handset and
		must be used for internal calls.
		If registration does not work:
		• Try again selecting a different base number.
		• Make sure there is no other electrical equipment very close by
		that may interfere with the registration signal.

IMPORTANT	Register a different make of handset to your
DECT GAP Profile only guarantees	BT Studio 3100 base
that basic calling-functions will work
correctly between different	1. At the base: Press and hold	for 3 seconds until
makes/types of handset and base.	you hear two beeps. You now have 90 seconds to register the
There’s a possibility that certain	you hear two beeps. You now have 90 seconds to register the
services such as Caller Display will not	handset.
work correctly.

2.At the handset: Follow the registration instructions given in your handset’s user guide.

Handsets can be registered with up to 4 bases.

Selecting a base

When your handset is registered to more than one base, for example, one at work and one at home, you can select the base you want it connected to.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com