BT manual BT Studio 3100 multipack users only, Battery performance

8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 8

BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474

8 Getting started

Battery performance		BT Studio 3100 multipack users only:
To keep the batteries in the best		Place each BT Studio 3100 charger within reach of a mains
condition, leave the handset off the
base for a few hours at a time.		power wall socket.
Running the batteries right down at
least once a week will help them last
as long as possible.		Connect the charger(s) and charge the handset(s)
After charging your handset for the	i.	Plug the mains power adaptor into the power socket on the
first time, subsequent charging time
for the batteries is approximately		underside of the charger and plug the other end to the mains
6 –8 hours.		power wall socket.
The charge capacity of rechargeable
	ii. Insert the 2 x AAA rechargeable batteries supplied, taking
batteries will reduce with time as
they wear out, thus reducing the		note of the polarity markings inside the battery
talk/standby time. Eventually they
		compartment, then slide the battery compartment shut.
will need replacing.
New batteries are available from	iii. Place the handset on the charger. You should let the batteries
the BT Studio Helpline on		charge continuously for at least 24 hours.
0870 605 8047 or email
bt.helpdesk@suncorptech.com.		The display will show the time and the handset number,
		e.g. 2, to show it is registered to the base.
		Your phone is now set up to make and receive calls.
		Your BT Studio 3100 is now ready for use.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com