BT 90 manual Need more help?

Page 26

Help

Telephone problems

Possible cause

Solution

 

 

 

Call appears to have been cut off after pressing the

SECRECY button

You may have pressed a number key on the handset after pressing the SECRECY button. The current handset will try to transfer the call to another handset.

Wait 30 seconds; the call will return to the current handset. Or press the TALK button and the call will return immediately.

• Batt low light on the handset

The handset needs recharging.

Replace the handset on the base

is flashing.

 

unit, ensuring that the base unit is

 

 

plugged in and that the CHARGING

 

 

light is on.

No Charging light on the base unit.

Dirty contacts on base unit or handset.

Clean the contacts with a dry cloth. Heavy soiling can be removed with a pencil eraser.

Back-up battery fails

Frequent power failures will drain

frequently.

the back-up battery.

 

Unplugging the base unit from the

 

power supply drains the back-up

 

battery.

 

Switching the mains supply off will

 

drain the back-up battery.

Leave the base unit plugged in, or remove the back-up battery before unplugging.

Do not switch off, or remove the back-up battery before switching off.

Need more help?

Call the BT Cordless Phone Helpline on Lo-call 0845 7697146 where fully trained staff can help you from 9.00am to 5.30pm Monday to Friday (calls charged at local BT rate).

It is not permitted to interfere with the main BT socket or wiring. If you have a problem, contact BT on Freefone 0800 800 151 for residential or Freefone 0800 800 154 for business lines.

24

Image 26
Contents Freestyle Page At a glance Telephone line Cord socket This guide Hints and tips boxesDate of purchase Place of purchase Serial number Purchase priceFreestyle 90 handset Handset aerial Check your telephone wall socketPlug the power cable into the back of the base unit Charge the handsetPlug the phone into the BT socket Place the handset on the base unit to rechargeTo plan the location of the base unit Extend the base unit telescopic aerialTo wall mount your product Listen for the dialling tone Dial the number you want Making and receiving callsLift the handset off the base unit Press the Talk buttonTo redial the last number called Last number redialPress the Talk button and wait for a dialling tone Press the Quickdial button To store a number in the memoryTo dial a stored number of more than 20 digits To dial a stored numberTo store a number of more than 20 digits To change a stored numberTo page the handset Using the Secrecy buttonPaging the handset To set the tel mode switch Changing the telephone settingsTo set the base unit ringer volume To switch from Pulse to Tone dialling during a callTo insert a pause To use the recall buttonCall Return BT Select ServicesTo use the 1471 feature Call WaitingOther services Registering your handset To register an additional handsetPress and release Setting the handset numberPress the button four times To answer the call press the Talk button Whilst on a call ie. in talk mode Press the Secrecy buttonPress the Talk button or replace the handset Telephone problems Possible cause Solution Help Need more help? Technical information To compatible switchboardsTo shared service party lines As an extension to a payphone To direct exchange linesTransmission frequencies of available channels Safety adviceTransmission frequencies Ringer Equivalence Number RENConnection information Installing a handset battery pack and recharging MaintenanceUndo the plastic belt securing the battery pack To change the handset battery packCare of rechargeable battery pack Dispose of Ni-Cad battery packs safelyEvent of a power failure General cleaningBT guarantees Freestyle 90 for a year, provided that GuaranteeSetting up IndexWall mounting Wall mounting Wall mounting Page Offices in Europe, North America, Japan and Asia Pacific 504222