BT 90 manual Plug the power cable into the back of the base unit, Charge the handset

Page 9

4 Plug the power cable into the back of the base unit

Setting up

5 Connect the base unit three-pin adaptor to a power socket

12V AC

PHONE LINE

Plug the adaptor cable into the socket on the back of your Freestyle 90.

Warnings

1 Do not try to use any power supply other than the one provided. This may permanently damage your Freestyle 90.

2 Your Freestyle 90 should not be fitted in wet or damp conditions, for example in a bathroom. Also, the handset should not be left out in the rain.

3 There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the base unit from the mains during storms.

POWER

When the power is switched on at the mains, the red POWER light on the base unit will light up.

Mains power adaptor

The Freestyle 90 must only be used with the adaptor supplied.

Using any other adaptor will result in non-compliance with EN60950:1992, and will invalidate the approval given to this apparatus.

6 Charge the handset

When you first use your Freestyle 90, the rechargeable battery in the handset needs charging for 24 hours.

•Make sure you have connected your Freestyle 90 to the mains power supply; see steps 4 and 5.

•Make sure the red POWER light is on.

•Place the handset on the base unit, ensuring the contacts are touching. The CHARGING light comes on.

7

Image 9

Contents Freestyle Page At a glance Telephone line Cord socket Hints and tips boxes This guidePurchase price Date of purchase Place of purchase Serial numberFreestyle 90 handset Check your telephone wall socket Handset aerialCharge the handset Plug the power cable into the back of the base unitPlace the handset on the base unit to recharge Plug the phone into the BT socketExtend the base unit telescopic aerial To wall mount your productTo plan the location of the base unit Lift the handset off the base unit Making and receiving callsListen for the dialling tone Dial the number you want Press the Talk buttonLast number redial Press the Talk button and wait for a dialling toneTo redial the last number called To store a number in the memory Press the Quickdial buttonTo store a number of more than 20 digits To dial a stored numberTo dial a stored number of more than 20 digits To change a stored numberUsing the Secrecy button Paging the handsetTo page the handset To set the base unit ringer volume Changing the telephone settingsTo set the tel mode switch To switch from Pulse to Tone dialling during a callTo use the recall button To insert a pauseTo use the 1471 feature BT Select ServicesCall Return Call WaitingOther services To register an additional handset Registering your handsetSetting the handset number Press the button four timesPress and release Whilst on a call ie. in talk mode Press the Secrecy button Press the Talk button or replace the handsetTo answer the call press the Talk button Telephone problems Possible cause Solution Help Need more help? To shared service party lines As an extension to a payphone To compatible switchboardsTechnical information To direct exchange linesTransmission frequencies Safety adviceTransmission frequencies of available channels Ringer Equivalence Number RENConnection information Undo the plastic belt securing the battery pack MaintenanceInstalling a handset battery pack and recharging To change the handset battery packEvent of a power failure Dispose of Ni-Cad battery packs safelyCare of rechargeable battery pack General cleaningGuarantee BT guarantees Freestyle 90 for a year, provided thatIndex Setting upWall mounting Wall mounting Wall mounting Page 504222 Offices in Europe, North America, Japan and Asia Pacific