BT 90 manual Wall mounting

Page 35

Wall mounting

Your Freestyle 90 can be wall- mounted by using the bracket provided.

You can use the bracket as a template to mark where the screws should go into the wall.

Before you wall-mount your Freestyle 90, check that:

•the wall can support the weight of the base unit and handset;

•the position you choose leaves sufficient space so that the base unit (which is larger than the bracket) is clear of any obstruction on the wall, such as a shelf or cupboard. Room should be left so that the handset can be placed on charge without touching any obstructions.

•leave enough room for aerial to be extended when wall mounted.

Spare parts for your Freestyle 90 are available from your BT shop or supplier, or you can contact us on Lo-call 0845 7697146 between 9.00am and 5.30pm Monday to Friday.

WALL PLUG	SCREW
WALL	28mm

•Drill two holes for the screws and insert the wallplugs provided (if required).

•Drive the screws into the wall, leaving about 5mm free on which to mount the bracket.

•Hook the bracket over the screw heads to check if it fits correctly, then remove again.

•Make sure that the power supply and the telephone cables are connected to the base unit, then fit the cables into the channels on the bottom of the base unit.

•Clip the bracket onto the base unit as shown on the next page.

•Hook the bracket with the phone attached over the screw heads.

Attach the bracket by hooking it over the screws protruding from the wall.

33

Image 35

Contents Freestyle Page At a glance Telephone line Cord socket Hints and tips boxes This guidePurchase price Date of purchase Place of purchase Serial numberFreestyle 90 handset Check your telephone wall socket Handset aerialCharge the handset Plug the power cable into the back of the base unitPlace the handset on the base unit to recharge Plug the phone into the BT socketTo plan the location of the base unit Extend the base unit telescopic aerialTo wall mount your product Press the Talk button Making and receiving callsLift the handset off the base unit Listen for the dialling tone Dial the number you wantTo redial the last number called Last number redialPress the Talk button and wait for a dialling tone To store a number in the memory Press the Quickdial buttonTo change a stored number To dial a stored numberTo store a number of more than 20 digits To dial a stored number of more than 20 digitsTo page the handset Using the Secrecy buttonPaging the handset To switch from Pulse to Tone dialling during a call Changing the telephone settingsTo set the base unit ringer volume To set the tel mode switchTo use the recall button To insert a pauseCall Waiting BT Select ServicesTo use the 1471 feature Call ReturnOther services To register an additional handset Registering your handsetPress and release Setting the handset numberPress the button four times To answer the call press the Talk button Whilst on a call ie. in talk mode Press the Secrecy buttonPress the Talk button or replace the handset Telephone problems Possible cause Solution Help Need more help? To direct exchange lines To compatible switchboardsTo shared service party lines As an extension to a payphone Technical informationRinger Equivalence Number REN Safety adviceTransmission frequencies Transmission frequencies of available channelsConnection information To change the handset battery pack MaintenanceUndo the plastic belt securing the battery pack Installing a handset battery pack and rechargingGeneral cleaning Dispose of Ni-Cad battery packs safelyEvent of a power failure Care of rechargeable battery packGuarantee BT guarantees Freestyle 90 for a year, provided thatIndex Setting upWall mounting Wall mounting Wall mounting Page 504222 Offices in Europe, North America, Japan and Asia Pacific