BT 1025 manual To delete your outgoing message, To set the day and time

ANSWERING MACHINE

To delete your outgoing message

	You can delete your outgoing message
	and return to your Freestyle 1025’s
Menu	pre-recorded outgoing message.
	Press the SCREEN/MENU button.
Screen
T
UV	Press the 8 button.
8
	“Your outgoing message is…”
De	While the message is playing, press
le
t
e
JKL
5	the 5 button.
	Your Freestyle 1025 will beep and play
	its pre-recorded outgoing message.
	“Hello, your call cannot be taken at the
	moment, so please leave your message
	after the tone.”
	Your own message has now been
	replaced by the Freestyle 1025’s original
	pre-recorded message.
	You can stop any function at any time
	and return to the last ‘Answer On’ or
	‘Answer Off’ setting by pressing the
Stop	STOP button on the base unit.

NOTE

Press the SCREEN/MENU button at any time to

return to Standby mode.

To set the day and time

NOTE

You only have 8 seconds to set up your

Day and Time otherwise the Freestyle 1025

will return to the standby mode.

Your Freestyle 1025 automatically adds the day and time to all messages and memos.

When you switch on your Freestyle 1025 for the first time, the clock is set to Saturday 12:01. You can change the day and time as required. The display will show C until the clock has been set.

To set the day and time for each incoming message left on the Freestyle

1025 answer machine:

Menu

Screen Press the SCREEN/MENU button.

Press the ✱ button. The machine announces “To set day and time press ✱”.

To hear the day and time, press #.

Press the ✱ button. The machine announces “Please enter new day and time after the tone”.

KEYPAD Enter the day, followed by time (using the 24 hour clock).

1= Sun, 2 = Mon, 3 = Tues, 4 = Wed,

5 = Thur, 6 = Fri, 7 = Sat.

For example:

11415 = Sunday 2.15pm

or

5 0915 = Thursday 9.15am

16