BT 1025 manual Incoming messages, To adjust the loudspeaker volume

Page 21

To adjust the loudspeaker volume

Your Freestyle 1025 has a volume range of 0-H. The pre-set level is 5.

Volume

 

 

Press VOL + to increase the volume.

 

 

 

 

 

 

 

 

 

 

 

When you reach the maximum volume,

 

 

 

 

 

 

 

the LED display shows H.

 

 

Volume

Press VOL – to decrease the volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When you reach the minimum volume,

 

 

 

 

 

 

 

the LED display shows 0.

If you adjust the volume when the answering machine is not being used, a beep sounds at the level you are selecting. When the volume is at its highest or lowest setting, you hear

2 beeps.

Incoming messages

Your Freestyle 1025 will automatically record an incoming message when it is connected to your phone socket and is set to ‘Answer on’.

While a message is being recorded, the display flashes r. It will stop recording if the caller stops speaking for longer than 7 seconds.

When a message has been received, the LED display counts up by one.

Your Freestyle 1025 automatically adds the day and time of recording to the end of each message.

3 minutes is the maximum time allowed for each incoming message. If the maximum message length is reached – or if the memory becomes full – the caller hears the message “Thank you for calling” and your Freestyle 1025 hangs up.

Your Freestyle 1025 will also hang up if you press the STOP button.

If there is less than 40 seconds of recording memory left, the caller will hear the announcement “Please complete your call within 10 seconds” after the outgoing message is played.

Your Freestyle 1025 can hold a maximum of 59 incoming messages or up to a total of 14 minutes of recording.

When more than 9 messages are stored on the answering machine the LED display shows 9 flashing.

When the recording memory is full, the display alternates between the number of messages and F.

If the answering machine is switched on, and the memory is full, incoming callers will hear the pre-set message “Hello, your call cannot be taken at the moment and you cannot leave a message, so please call later”. If the caller is still on the line after 8 seconds, they hear the message “Thank your for calling” and your Freestyle 1025 hangs up.

NOTE

If a call comes in while you are playing back a

message or memo, the playback stops and the machine

is ready to take the call.

ANSWERING MACHINE

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Freestyle User GuideKey features Page Talk At a glancePlay Page This guide Using your Freestyle 1025 answering machineUnpacking your Freestyle IntroductionFor your records Emergency callsCheck your telephone socket Setting upPlug the 3 pin adaptor into Charge the handset battery for at Least 24 hoursPlug your Freestyle 1025 into Phone socket Base unitYour Freestyle 1025 is now ready for use To make a call Making and receiving callsTo end a call To receive a callUsing the Secrecy button Using the Quickdial to store and dial numbersTo ensure the best sound quality If you go out of rangeTo dial a stored number To store an engaged number MemoryTo store a number of more than 20 digits To adjust the incoming speech volume To adjust the base station ringer volumeTo adjust the handset ringer volume Call return To use the 1471 featureCall Waiting To use Call WaitingTo set the dialling mode To switch from pulse to tone diallingTo page the handset To insert a pause To use the recall button Message display on the base station About your Freestyle 1025 answering machineTo switch the answering machine on/off Setting up your answer machineTo record your outgoing message via the handset To check your outgoing messageTo set the day and time To delete your outgoing messageIncoming messages To adjust the loudspeaker volumeTo play back a message at the base To pause a message at the baseTo delete an individual message at the base To cancel deletion from the base Answer delayTo check the answer delay setting at the base station To change the answer delay settingMessage alert To switch the message alert on or offPress To play your messages from the handsetTo delete all messages at the handset To delete individual messages at the handsetMessages End of messagesTo set the security PIN code Security codeTo screen a call from the base unit To screen a call via the handsetMemos To record a memoTo hear main menu, press To check for messages Remote accessOperating the answering machine Registering your handset To erase a registration codeTo register an additional handset To re-register an additional handset To set the handset numberTo set a handset identity number Basic use of Freestyle additional handsets Transferring calls between handsetsHelp Telephone problems Possible cause SolutionTelephone problems Possible cause Solution Batt LOW light on the handset Answering Machine problems Possible cause Solution Technical information You may connect itYou may not connect it Channels Base Unit Tx Handset Tx Freq./MHz Maintenance Guarantee Wall mounting Wall-mounting template Index 10-11 Page Offices in Europe, North America, Japan and Asia Pacific 610235
Top Page Image Contents