BT 1025 manual Answer delay, To delete all messages at the base, To cancel deletion from the base

To delete all messages at the base

When all messages have been played back you hear the announcement “End of messages” and the LED display counts down from 8-0.

Delete	During the 8-0 countdown press DELETE.
	At the end of the countdown you hear
	the confirmation announcement
	“All messages deleted”.

To cancel deletion from the base

Stop Cancel deletion by pressing the STOP button during the 8-0 countdown. All messages will be saved including any marked for deletion.

Answer delay

Answer delay sets the number of times your Freestyle 1025 will ring before answering a call. The original setting is for your machine to answer after 6 rings. You can change this setting between 2-9 rings or Time Saver.

NOTE

If you set your 1025 Answer Delay to Time Saver this means that when you call in from another phone (remote access), if any messages have been recorded your Freestyle 1025 will answer after only 2 rings. If there are no messages, it will answer after 6 rings, thereby allowing you the option of hanging up before your Freestyle 1025 answers. In using Time Saver, you can avoid the cost of a call.

To check the answer delay setting at the base station

	Press buttons in order shown
Skip	Press the SKIP > button.
	Your Freestyle 1025 will announce the
	current setting. “Calls will be answered
	after 6 rings”.

To change the answer delay setting

Skip	Press and hold the SKIP > button until
	the current setting is announced “6”.
	Keep holding the SKIP > button and
	your Freestyle 1025 will announce the
	answer delay options: 7, 8, 9 “Time
	Saver, 2, 3, 4, 5”.

When you hear the setting you want,

Skip release the SKIP > button. Your Freestyle 1025 will then announce the new setting e.g. “Answer delay, Time saver” and return to ‘Answer on/off ’ mode.

ANSWERING MACHINE

19