Setup Menu
Local Code
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU. LOCAL CODE is displayed.
4.Press MENU.
5.Enter your local area code (3 Digits) with the keypad. Any calls received from this area code will be displayed as 7 digits in caller ID. If you make a mistake, use the ESC/FLASH button to erase.
6.Press MENU to save the LOCAL CODE.
Set Default
Use this to return the unit to the original settings.
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU.
4.Press CID/UP until SET DEFAULT is displayed.
5.Press MENU. CONFIRM is display.
6.Press MENU to reset to default or ESC/FLASH to exit.
Set Time
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU.
4.Press CID/UP until SET TIME is displayed.
5.Press MENU. The year begins to flash at the bottom right of the screen.
6.Press CID/UP to increase the year value. Press Volume Down button to decrease the year value.
7.When the correct year value is displayed, press MENU. Now the month value begins to flash.
8.At this point, you can enter values for month, day, hour and minutes as described in Steps 6 and 7 above. However, you can also just press MENU 4 times to accept the current values. All values except the year will be reset by any caller ID (CID) calls.
10