Cortelco DECT 6 instruction manual Dial Mode, Backlight Time

Page 14

Dial Mode

Use this option to select TONE or PULSE dialing. The default setting is TONE.

1.Press MENU.

2.Press CID/UP until SETUP is displayed.

3.Press MENU.

4.Press CID/UP until DIAL MODE is displayed.

5.Press MENU.

6.Use CID/UP to select between TONE and PULSE.

7.Press MENU.

Backlight Time

Use this option to change the time that the display is lighted after coming off hook or pressing a key.

1.Press MENU.

2.Press CID/UP until SETUP is displayed.

3.Press MENU.

4.Press CID/UP until BACKLIGHT TIME is displayed.

5.Press MENU.

6.Use CID/UP to select a value between 5 seconds and 20 seconds.

7.Press MENU.

14

Image 14

Contents OWNER’S Instruction Manual Contents Page Thank YOU For Purchasing Important Safety Instructions Safety Instructions for Handset Battery Pack Unpacking and Installation Box ContentsTelephone Part Identification LCDDesk Mount InstallationInitial Setup Wall MountLocal Code Setup MenuSet Default Set TimeRegister Time FormatChange PIN Code Deregister New RegisterSelect Base ContrastAuto Talk Recall ModeUnit Name Dial Mode Backlight TimeTelephone Features Flash RingerRedial Keypad LockTransfer Volume ControlConference Call Intercom CallHS Ringer Vol Profile MenuHS Ringer Music Tone Key ToneAlarm 1/Alarm Room Monitor Function MenuNondisturb Baby Call Walkie TalkieDialing from the Phone Book Phone BookEntering a New Number Memory StatusDialing a Speed Dial Number Speed DialStoring a Speed Dial Number Assigning a Number to a GroupEditing a Phone Book Entry Deleting a Phone Book EntryDeleting All Phone Book Entries Dialing from the Call Log Call LogReviewing Call Records Storing a Call Log Entry to the Phone BookDeleting a Call Log Entry Deleting All Call Log EntriesMaintenance Information Troubleshooting Telephone Repair FCC Information Limited Warranty