Installation
Desk Mount
1.Connect the power adapter. The power adapter connects to the round jack on the bottom of the base. Plug the large part of the adapter into the wall outlet. Use only a 6V DC 350mA, center positive Class 2 adapter.
2.Connect the line cord. The line cord conncects to the telephone line jack on the bottom of the base.
3.Ensure that the batteries are installed in the handset by removing the battery cover.
4.Place the handset on the base.
Wall Mount
1.Connect the power adapter and the line cord. See Steps 2 and 3 above.
2.Mount the base on the telephone wall jack.
3.Ensure that the batteries are installed in the handset by removing the battery cover.
4.Place the handset on the base.
Initial Setup
After installing the phone, you should configure it for your location. To do this, you will need to set the local area code and the time and date. There are several other settings that you may wish to modify. All of these are contained in the SETUP menu which is discussed in detail on the following pages.
9