Unit Name
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU.
4.Press CID/UP until UNIT NAME is displayed.
5.Press MENU.
6.Use the keypad to enter the desired unit name. You may enter up to 8 characters. Use the ESC/FLASH button to erase if you make a mistake.
7.When the desired name is entered, press MENU.
Recall Mode
This setting changes the flash time of the unit. The choices are EXTRA LONG - 600 mSec, LONG - 300 mSec, and SHORT - 100 mSec. The standard flash time in the USA is 600 mSec which is the default.
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU.
4.Press CID/UP until RECALL MODE is displayed.
5.Press MENU.
6.Use CID/UP to select between EXTRA LONG, LONG, and SHORT.
7.Press MENU.
Auto Talk
If Auto Talk is ON, calls will be answered by removing the handset from the base. If Auto Talk is OFF, you must press the ANSWER button to answer a call. The default setting is OFF.
1.Press MENU.
2.Press CID/UP until SETUP is displayed.
3.Press MENU.
4.Press CID/UP until AUTO TALK is displayed.
5.Press MENU.
6.Use CID/UP to select between ON and OFF.
7.Press MENU.
13