Memorex MSP-PH2400 operating instructions Receiving a Call

Page 24

BASIC OPERATION (CONTINUED)

RECEIVING A CALL

The last 40 incoming calls are saved in the Caller ID log.

1

Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name of the caller, number, time and date of the call. To answer the call if the handset is out of the base, press the TALK button. If the handset is in the base, simply remove it from the base if the unit is set to auto answer On mode and if it is set to auto answer off mode, press the TALK button. The display will show the amount of time you have been on the phone.

NOTES:

If a call is received from an area which does not provide caller ID service, the display will show, "UNAVAILABLE".

If a call is received from a caller that has blocked his/her information, the display will show, "PRIVATE".

When you receive the first call, the unit will automatically set the time and date. Calls picked up on the first ring will not be logged in the Caller ID log.

Call Waiting calls are shown in the Caller ID log if you subscribe to the extra feature from the phone company that allows this.

If there are new calls, "NEW" will blink in the display and the MSG/NEW CALL indicator will blink.

23

MSP-PH2400/09172C(ENGLISH)

24

12/16/01, 12:29 PM

Image 24

Contents Model MSP-PH2400 Important Safety Precautions Risk of Electric Shock Do not OpenDo not use the telephone to report a gas leak near the leak Battery Precautions Important Safety Precautions Contents Location of Controls HandsetInstallation Instructions Please Refer to the Following Diagram for Steps 4 ThroughInstallation of the Rechargeable Battery Setting the Ringer SET-UP InstructionsSetting the Language Setting the First Ring Mode Setting the Time Setting the Area Code Setting the LCD Contrast Setting the PBX Number Setting the PBX Mode Setting the Pause Time Setting the MSG Message Waiting Setting the Auto Answer Mode Setting the Private Ring Mode Setting the Unavailable Ring Mode Basic Operation Placing a CallReceiving a Call Using the Redial DEL/RE-PA Button Ending a CallOUT of Range Warning MSG Waiting Voice Mail MessagesUsing the Base page Button Using the Flash TONE/PULSE SwitchUsing the Tone Button Call Waiting Checking the Caller ID LOGDeleting ONE NAME/NUMBER from the Caller ID LOG Deleting NAMES/NUMBERS from the Caller ID LOGDialing a Number in the Caller ID Display Adding a Directory Entry Saving Caller ID Information to the DirectoryEntering a Name Using the KEY Buttons Character MAP ChartDialing a Number from the Directory Preferred Calls VIP Rejecting Blocking Calls REJEditing a Directory Entry Deleting ONE NAME/NUMBER from the Directory Troubleshooting Guide Symptom SolutionCare and Maintenance MSP-PH2400/09172CENGLISH 12/16/01, 1230 PM Memcorp, Inc Weston, FL