TROUBLESHOOTING GUIDE | |
|
|
SYMPTOM | SOLUTION |
No dial tone. | Make sure the telephone line cord is connected |
| properly to the modular wall jack. |
|
|
No power on the | Make sure the battery pack is properly connected |
handset. | inside the handset. |
| The handset may need recharging, recharge handset. |
|
|
Handset does not | Make sure the charging contacts on both the base and |
charge. | handset are in contact during charging. |
|
|
| The charging contacts may be dirty, clean with |
| |
|
|
| The battery may not be good anymore, replace battery. |
|
|
Range is limited. | Move the base so it is centrally located in your |
| residence or office and make sure the base is not |
| located near an appliance. |
|
|
Call received | The handset may need recharging, recharge handset. |
flutters or fades. |
|
|
|
Cannot hear ringer. | Ringer volume may be too low, raise ringer volume. |
|
|
| Make sure the telephone line cord is connected |
| properly to the modular wall jack. |
|
|
Caller ID information | You must subscribe to Caller ID service. |
does not appear. |
|
You must let the phone ring twice before answering. | |
Time does not | If you subscribe to Caller ID service, the time and date |
automatically set. | will automatically set during the first call. If you do not |
| subscribe to Caller ID service, you must set manually. |
|
|
36
37 | 12/16/01, 12:30 PM |