SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE TIME
It is necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller
ID, the time and date are automatically set when the first call is received.
If the time is not automatically set, follow the steps below:
1 |
2 |
While in the Standby mode, press and hold the MENU/MUTE button.
Press the Key button 4 
, or the Up/Down buttons
to select the Time Set setting.
3 |
Press the EDIT/FLASH button.
5 |
Press the MENU/MUTE button to exit the program mode.
4 |
Using the Key buttons, enter the month, day, hour, minute and AM/PM (press key button 1 for AM, 2 for PM). The cursor will move automatically after each entry. Enter two digits for each setting, for example, for April, press 0,4.
12
13 | 12/16/01, 12:29 PM |