EN
6.Press 
to make the AM / PM option flash. Select AM / PM, then
press 
to set the time. (When using the 24 hour clock you will not be asked to select AM / PM.)
SETTING THE BASE UNIT TIME FORMAT
1.Follow steps 1 and 2 above, then select “TIME FORMAT” and press 
.
2.Select “12 or 24 Hour Format” and press 
to confirm.
SETTING THE BASE UNIT DATE
1.Press 
, then use 
or 
to select “SET TIME & DATE”, then
press 
.
2.Select “SET DATE”, and press 
.
3.Use 
or 
to scroll through the numbers and 
to move between the days, months and years.
SETTING THE BASE UNIT DATE FORMAT
1.Follow steps 1 and 2 above, then select “DATE FORMAT” and press 
.
2.Select “dd/mm/yy” or “mm/dd/yy” and press 
to confirm.
SETTING THE BASE UNIT ALARM
1.Press 
, then use 
or 
to select “ALARMS”.
2.Press 
.
3.Select “Alarm 1” or “Alarm 2”, then press 
. (A tick will appear next to a previously enabled alarm.)
4.Select “Yes” and press 
.
5.Use 
or 
to set the time of the alarm and 
to select hours or minutes. (If you are using a
6.When the time is set, press 
and “Alarm Tone” options will appear.
7.Select 1 of the 4 available tones, then press 
. A tick will appear next to your selected tone and the phone will go to Standby Mode.
21