EN
3.The paged handset will ring and “INT CALL” will appear on the display.
4.To answer the call on the paged handset, press 
.
5.Press 
on the paging handset to transfer the call.
NOTE: If the other handset does not answer, press 
to end the intercom call and get back to the external line. Pressing 
will end both the intercom call and the external call.
REGISTERING HANDSETS TO BASE UNIT
The handset and base unit are factory
When you purchase an additional handset, you have to register it to the base unit in order to make and answer calls.
You can register up to 5 more handsets to make and answer calls via the same base unit. Handsets are numbered 1 to 6.
To register a new handset:
1.Press and hold the PAGE button on the cradle of the base unit to enter Registration Mode.
2.On the handset, press 
.
3.Use 
and 
to select “Handset Setting”, then press 
.
4.Select “Registration”, then press 
.
5.Use 
and 
to select “Base 1, 2, 3 or 4”, then press 
.
6.Enter the default Pin Code “0000” then press 
.
7.You will see the message: “REGISTERING”.
8.When the registration is complete “Registration Success” will appear on the screen.
NOTE: The base unit will then send a signal to the handset registering the handset to the base unit. Once the registration function has been completed, the handset will return to Standby Mode.
DE-REGISTERING HANDSETS
To
1. On the handset, press 
.
25