Motorola MD7080 Series manual Setting the Date and Time for Your Telephone, Values

Page 34

Setting the Date and Time for Your Telephone

	1	Press MENU.
	2	Scroll to Date/Time.
	3	Press SELECT.
	4	Enter the time. (Two digits are required for both
		hour and minutes, so use a leading 0 for one digit	Setting
		values.)
	5	Select AM/PM to switch between AM and PM if you
		are using a 12-hour clock.
		are using a 12-hour clock.	Up
	6	Scroll down to move to the next field.	Up
	6	Scroll down to move to the next field.
	7	Select CHANGE to change the time format (12-hour
		or 24-hour clock). Scroll down to move to the next
		field.
	Note: When setting the Date and Time from the
	base unit, scroll down and press CHANGE to select the
	correct day of the week.
	8	Press HANGE to select a different date format
		(MM/DD or DD/MM).
	UNCONTROLLED9 Scroll down to move to the next field.
	10	EnterDOCUMENTthe current date.
	11	Select DONE.
	12	Select EXIT to return to the standby screen, or
		scroll to a different menu option.

18

Image 34

Contents Uncontrolleddocument Handset Overview WelcomeCongratulations on your purchase of a Motorola product Uncontrolled Base Station ControlsOr contact us at IiiWelcome Table of Contents Using the Answering Machine Vii FCC Information ViiiRJ14C/RJ14W Afford you the opportunity to correct the situationThis device may not cause harmful interference This device complies with Part 15 of the FCC RulesOperation is subject to the following two conditions This device must accept any interference receivedPlease consult your dealer or an experienced radio Helpful booklet, How to Identify and Resolve RadioIf these measures do not eliminate the interference Television technician for additional suggestions. AlsoInfoUNCONTROLLED FCC Document XiiIndustry Canada IC Information XiiiXiv PrivacyReceiving antenna Battery Safety Instructions Getting StartedCharging the Battery For the initial charge, charge the battery for LED lightsInstalling Backup Batteries Phone Navigation Phone company When the speakerphone is on, V displays When the phone is not in use, the standby screenSubscribe to Caller ID service from your local Is displayedUncontdocumentrolled Uncontrolleddocument Installation Installing the Phone on a DeskInstalling the Phone on the Wall Plug the telephone line cords for Line 1 and Line Plug the power cord into the back of the baseInto an electrical outlet Into the jack on the back of the phone. Line 1 =Uncontrolleddocument Setting Up Personalizing Your New Telephone SystemSetting the Ring Tone and Ring Volume Setting Key Beeps On or OffSetting the Ring Tone Press Select Naming a Handset or Base UnitPress Menu Enter the name you want to use up toUncontrolled First letter of the entry is an uppercase letter. oAre using a 12-hour clock Setting the Date and Time for Your TelephoneSelect AM/PM to switch between AM and PM if you ValuesSetting the Language Ending a Call Using the PhoneMaking a Call Answering a CallUsing Automated Dialing Adjusting the Volume During a CallInserting Pauses in a Number TheUsingPhone Using the Speakerphone Muting a CallRedialing a Number Putting a Call on HoldPhonebook, the name from the phonebook displays Using the Phonebook Storing a New NumberChange the entry from uppercase to lowercase Scroll downStoring a Recently Called Number Number, select CHANGE. a tone plays each time you Storing a Caller ID NumberEditing a Phonebook Entry Deleting a Phonebook Entry Sorting the PhonebookDisplayed Using Caller IDCalling a Number from the Phonebook Reviewing the List of Caller ID CallsPhoneUNCONTROLLED Deleting Caller ID CallsMultihandset Functions Registering an Expansion Handset Deregistering an Expansion HandsetUsing the Intercom Select PAGE. The other phone is pagedEnabling Auto-Answer Transferring Calls to Other HandsetsTo conference Conference CallingCreating a Conference Call with Lines 1 If you are on A, and B rings with the party you wishMonitoring a Room Using the Answering Machine Answering Machine OverviewSetting Voice Prompts Setting Up the Answering MachineTurning the Answering Machine On or Off Scroll to and select Record Quality Setting Recording QualitySetting Up Your Outgoing Message Prerecorded greeting will playChanging the Outgoing Message Setting the Number of Rings Before the AnsweringMachine Picks Up Release the Memo button to stop recording Setting the Security ID NumberRecording a Memo Checking Messages from the Base UnitChecking Messages from a Handset Select Menu Scroll to and select MessagesChecking Messages Remotely Message Forwarding Screening Calls Quick Enable Message ForwardingMemo again Is being recordedAnswering Machine Motorola Limited Warranty What Does this Warranty Cover?Exclusions Who is Covered What Other Limitations Are There? Mgbi