The correct sequence of the 4 security PIN digits needs to be detected before entering remote access mode. Random digits detected prior to the correct 4 digits sequence are ignored, and answering machine recording continues until the complete PIN is detected. There is no system prompt to enter the remote access code.
Press the following keys on your handset to perform the following functions, after entering your remote access mode.
Press... To...
1Repeat message
2Play/Stop message
3Skip forward to the next message
4Toggle Answer Off/Announce Only/Announce and Record modes
7Listen to the Main Menu (for Full Voice prompts only)
0Delete message
3.27.10 Set the security code
This is used to change the remote access PIN if necessary.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
SECURITY CODE.
3.Press MENU and then enter the
4.Press MENU to save.
30 | Using the phone |
|
|