3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call timer will display after the first 15 seconds of your call. When the call ends, the total duration of your talk time is shown for 5 seconds.
3.1Switch the handset on / off
Press and hold Rto switch the handset on or off.
3.2Calls
3.2.1Make a call
1.Press <.
2.When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling | |
1. | Dial the number first. If you make a mistake press n |
| to delete the last digit. |
2. | Press <to dial. |
3.2.3End a call
Press <, or place the handset back on the base or charger.
3.2.4Receive a call
When you receive an external call, the phone rings and icon flashes on the display.
14
1.Press <to answer the call, or simply lift up the handset to answer the call.
NOTE
If you prefer to press <when you lift up the handset to answer a call, you will need to switch Auto answer off, see page 20.
3.3 Adjust the earpiece volume
During a call, press uor dto increase or decrease the volume. There are 5 levels to choose from.
3.4Secrecy
You can mute your handset so that you can talk to someone nearby without your caller hearing.
1.During a call, press n. The display shows MUTE and your caller cannot hear you.
2.Press nagain to resume your call.
3.5Intercom
3.5.1Make an internal call
If you have more than one handset registered to the base, you can make internal calls between two handsets.
icon is displayed to indicate an internal call.
1.Press Ifollowed by the number
Using the phone