9.2Register a different make of handset to your D5 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly between different makes/types of handset and base. There is a possibility that certain devices such as Caller ID will not work correctly.
On the base:
1. Press and hold the pbutton for 3 seconds until you hear two beeps. The base will remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
9.3Select a base
If your D5 handset is registered to more than one base (e.g. one at work and one at home), you can select which base to use.
Each handset can be registered with up to four bases.
1.Press m, scroll dto REGISTER and press m. The display shows SELECT BASE.
2.Press m. All the bases that your handset has been registered to will be displayed, e.g. BASE 1 2 3 4. The currently selected base number flashes.
3.Enter the base number that you want to use. Alternatively, press uor dto scroll to AUTO.
4.Press mto confirm. You will hear a confirmation beep and the display will return to the previous menu.
TIP
If you select AUTO, your handset will automatically search for and connect to the base with the strongest signal.
9.4De-register a handset
Use one handset to
1.Press m, scroll dto SETUP and press m.
2.Scroll dto DEL HANDSET and press m.
3.Enter the 4 digit PIN code (default = 0000) and press m.
4.Enter the handset number that you want to
Using additional handsets | 29 |
|
|