B2700_euro.QXD 24/6/02 9:09 am Pagina 12
Butler 2700/DUO
5.10.1 Setting the Flash time
Set the switch on the bottom of the base in the desired posi- tion!
5.11 Setting the ring volume
Press the volume button a few times in standby until the desired handset ring volume is heard.
Remark: The Base ring volume cannot be set!
6. CALLER-ID FUNCTION (CLIP)
The Butler 2700 displays the telephone numbers of incoming calls. This function is only possible if you are subscribed to a telephone operator that provides this service. Contact your telephone provider for more information. When you receive a call, the numbers are saved in a Call list. This list can hold
10 telephone numbers (each of max. 10 digits). If the num- ber is longer then 10 digits, only the last 10 digits are shown and stored!
6.1 New calls
When you’ve received a new unanswered call, the CLIP sym- bol appears on the display.
6.2 Consulting the Call list
When you consult the Call list, you will notice that the list always starts with the last call received.
•Press the Call Log button or the Up or Down button.
•Use the Up and Down buttons to scroll through the list. The Up key will skip backwards to the previous record, the Down key will skip forward to the next record.
•You can leave the Call list by pressing the R button.
12