Vonage VT2542 manual Go to Connecting your phone, on

6.Now plug your modem’s power cord back into an electrical power outlet.

NOTE: You should allow enough time for your modem to complete its start-up process. If you’re unsure about how long this takes, consult the manual that came with your modem. Typical modem start-up takes 60 seconds.

7.Next, using the power cord that came with your Vonage kit, plug the smaller end of the power cord into the circular power port on the back of the Vonage Device. Then, plug the larger end of the power cord into an electrical power outlet.

Vonage Device

NOTE: Before continuing, the “Power” and “Internet” lights on the front of the Vonage Device should both turn on. Wait until the “Power” light stops blinking and both “Power” and “Phone 1” lights are solid. The “Phone 2” light will be solid if you have a second Vonage line. Otherwise, it will not light. The “Internet” light will flicker whenever there is communication activity.

8.On your computer, open a web browser and check your Internet connection by visiting any website.

NOTE: After turning on your computer, the Ethernet light on the Vonage Device will also flicker whenever there is communication activity.

•If your Internet connection works,

go to Step 3: Connecting your phone, on page 7.

5