Step 3:
Connecting your phone
1.Plug a standard telephone cord into your phone.
NOTE: If not done so already, disconnect phone cord from wall.
2.Plug the other end into the Green Phone 1 Port on the back of the Vonage Device.
NOTE: Make sure the phone light is solid.
Vonage Device
This is what your setup should look like:
Existing | Computer | Phone | |
Modem | |||
(OR Router) |
| ||
|
| ||
| Vonage Device |
|
3.Pick up your handset. If you hear a dial tone, congratulations! You’ve set up your Vonage service correctly, and can now start making calls. To configure your voicemail and other included services features, simply login to your web account at www.vonage.com. In Canada visit www.vonage.ca.
NOTE: When you pick up your phone to check for a dial tone, the phone light will blink.
If you do not hear a dial tone, proceed to Troubleshooting | 7 |
Tips on page 10. |