Telular SX6P-200C user manual Connecting the Handset, Wall Mounting

Connecting the Handset

Before you use can use the SX6P, you must connect the handset cable.

1.Connect the handset cable to the phone jack - see Figure 7.

2.Connect the handset cable to the handset - see Figure 7.

Phone jack

Handset cable

Handset

Figure 7 – SX6P handset connection.

Wall Mounting

1.Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see Figures 8 and 9.

Mounting Clip in Cradle (tab up)

Remove Mounting Clip from the Cradle (tab down)

Insert Mounting Clip into the Cradle (tab up)

Figure 8 – Handset mounting clip assembly. Figure 9 – Handset mounting clip for wall-mount.

2.Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.

Phonecell® SX6P CDMA 3 User Manual