Placing a Call on Hold
1.During a call, press 
[Hold]. (Anotification will display in the upper right corner of the LCD display.)
2.To reactivate the call, press 
[Hold] again.
Contact your service provider regarding the availability of
To perform a 3-way call:
1.Place the first call and wait until it connects.
2.After the first call is connected, dial the second number.
3.Press 
[Flash]. This connects the second call and puts the first call on hold.
4.Wait for the second call to connect.
5.After you are connected to the second call, press 
[Flash], which then connects the first call and completes the
Adjusting the Handset or Speaker Volume
•During a call, press the up/down arrows to raise (
) or lower ( 
) the handset/speaker volume.
Reminder:
The Speaker is a
Voicemail Access
Contact your service provider regarding the availability of voicemail.
1.Press 
[Message].
2.Select 1: Voice Mail.
3.To listen to your voicemail, select 1: Listen.
4.If you have deleted all your messages and the message indicator does not go away after an hour, press 2: Clr Msg Ind.
Reading Text (SMS) Messages
When you receive a new text message, the envelope icon will appear on the display. To access messages:
1.Press 
[Message].
2.Select 2: Read Msgs.
3.Use the up/down arrows (
/ 
) to select the desired message. Press 
[Store] to read it.
4.Once you have read the message, you can do the following:
1:Delete
2:Forward
3:Reply
[Flash]: Call: dials the callback number in the message (if available)
Phonecell® SX6P CDMA | 9 | User Manual |