BONDING AN SX6P TO A RUIM
You can bond an SX6P to the RUIM that is inserted in it. Once an SX6P has been bonded to a RUIM, the SX6P will not operate normally with any other RUIM installed in it. It will reject incoming calls and permit only emergency outgoing calls. The same holds true for any other SX6P the bonded RUIM is installed into; it will not operate normally.
Bonding an SX6P to a RUIM can only be done once. It cannot be undone by the user.
Before you can bond the SX6P to a RUIM, the RUIM must have a PIN enabled. See Security (page 17) for details.
1.Press 
[Menu] to access the main menu.
2.Select 6: Phone Info.
3.Select 3: Tech Mode.
4.Enter your Tech User Password.
5.Select 8: Bonding PIN.
6.Enter the inserted RUIM’s PIN.
7.Cycle your SX6P’s power. After the unit reboots, it will be bonded to the RUIM.
Phonecell® SX6P CDMA | 19 | User Manual |