SpectraLink Corporation | NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide |
NetLink Desktop Chargers
NetLink e340 Wireless Telephone | NetLink i640 Wireless Telephone |
In DCE100 Desktop Charger | in DCX100 Desktop Charger |
Overview The NetLink Desktop Charger is a
Full charging is accomplished in approximately one and a half hours.
Set up the Desktop Charger by first obtaining the appropriate SpectraLink power supply for the country or region. Place the Desktop Charger on a flat, horizontal surface. Plug the power supply into the Desktop Charger and into an appropriate wall outlet.
The user must end any call in progress by pressing the End Call button on the handset before placing the handset into the Desktop Charger. The handset may be off or in standby mode during charging.
Indicator light Place the NetLink Wireless Telephone into the Desktop Charger slot facing forward. If the handset is placed correctly, the red indicator light will come on. The indicator light will not come on when the slot is empty, when the NetLink Wireless Telephone is improperly seated, or when the Desktop Charger has no power applied.
Charging indicator While the handset is charging in standby mode, it will display its extension number and Charging…. The battery icon will show
charging progress. The handset is fully operational and will ring if called. When the handset is charging while turned off, only Charging… will display and no calls will be received. The dots will be racing during the charging cycle. It is normal for the Battery Pack to become warm when charging.
Charge Complete When the handset is fully charged, Charge Complete will display. The indicator light will remain on until the handset is removed.
Part Number: | Page 29 |